How much quarter round do i need

When cutting along the top be careful not to veer off and cut the wall. This is where the being patient part applies. To remove the baseboard I use two crow bars, a small one and a large one. The first thing folks try to do is put the crow bar at the top and pry away from the wall.

Doing this can push in the drywall, and just creates more work. I use the small crow bar down at the floor, find a place where it doesn't quite touch the floor and work the small crow bar under it, pry it up a little and get the big crow bar under.

Using the big crow bar keep prying up down the wall until its fairly loose, now using the big crow bar at the top you can pry it away from the wall without too much force. The nails that stay in the wall need to be removed.

Floor Preparation. How to Measure for Baseboard or Quarter Round. Installing Laminate at Sliding Glass Doors. Where to Start when Installing Laminate Flooring. Cutting Laminate to Fit around Corners. Take a piece of paper and make a simple chart to help keep your numbers organized as you measure. Create a list down the right side of the page with the name of each room you will measure , such as master bedroom, front hallway, dining room and so on.

Leave space to the right of the room names for the measurements. Use a measuring tape to calculate the square footage of each room that will need base trim. Choose a starting place in the room -- such as a corner or next to the door frame -- and measure the length of the wall in inches. Write down each measurement and continue around the room until all walls are measured.

We get Laminate flooring is sold by the carton. Each carton generally contains 20 square feet, but this can vary by style. Check with your Project: Partner for exact quantities. If the product we selected has 20 square feet per carton, then divide Plan the vinyl layout on your floor plan diagram. If the width of the room is less than the width of your chosen vinyl, which will be 12 feet for our example, then multiply the width of your vinyl by the length of the room.

In our example, the room is 10 feet wide and 18 feet long. The actual square footage is square feet; however, that would result in a seam down the center of your room. To avoid a seam, multiply the width of the vinyl, 12 feet, by the length of the room, 18 feet. The total is square feet.